In this blog post, you’ll find out all the basics of 12 gauge wire and how it differs from other types of speaker wire. If you’ve just started your journey into home recording, or if you’re considering switching to a better speaker wire for your studio, this blog is for you!
What is a 12 gauge speaker wire?
12 gauge speaker wire is a type of wire that is typically used to connect speakers together. It is a thicker wire than other types of wire, and it is usually used in applications that require a stronger connection.
One common use for 12 gauge speaker wire is in-car audio systems. This wire is often used to connect the speakers in a car stereo system. It is also often used to connect the speakers in an amplifier to the car battery.
12 gauge speaker wire is also often used in home audio systems. This wire is often used to connect the speakers in a home stereo system. It is also often used to connect the speakers in an amplifier to the home theatre system.
12 gauge speaker wire is a type of wire that is typically made of copper. It has a thickness of about 0.08 inches (.2 cm). This wire can be sold in rolls or coils, and it comes in different colours (including black, blue, green, red, and yellow).
If you are looking for a strong and durable connection between your speakers, a 12 gauge speaker wire should be your choice.
What are its benefits?
1. 12 gauge speaker wire is a great option for wiring your car audio system. It is a small diameter wire, which makes it ideal for connecting components close together. This wire is also resistant to corrosion, which means it will last longer than other types of speaker wire.
2. Another benefit of using 12 gauge speaker wire is that it is less prone to interference. This type of wire does not carry as much electricity as other types of speaker wire, meaning it will not cause interference with other electronic devices in your car.
3. Finally, 12 gauge speaker wire is affordable and easy to find. This type of wire is commonly used in-car audio systems, so you are likely to have some on hand if you need it.
How much speaker wire do you need?
When wiring a 12 gauge speaker system, most people use around 30 feet of wire. That’s because 12 gauge wire is .024 inches thick, which is the same thickness as a regular electrical wire.
Essential tools when using 12 gauge wire
If you’re planning on building a project that involves using 12 gauge speaker wire, you’ll need to be familiar with some of the essential tools that are needed. Here are the three key items that you’ll need:
A crimping tool: This is used to connect the speaker wires together.
This is used to connect the speaker wires together. A cable stripper: This is used to strip away insulation from the wires.
This is used to strip away insulation from the wires. A fuses holder: This is used to hold fuses near the wire connections.
Once you have these essential tools, follow these simple steps to get started:
1. Crimp the speaker wires together using the crimping tool. Make sure that the ends of the wires are properly aligned and pressed firmly against each other.
2. Strip away any insulation from the ends of the speaker wires using the cable stripper. Make sure that all of the insulation is removed, leaving only the bare wire exposed.
3. Place a fuse in each fuse holder and attach it to power sources (if necessary). Then, connect each wire to its respective fuse using the corresponding connector.
