5 Maintenance Tips For Commercial Garage Doors

If you have a commercial garage door, you should keep a few maintenance tips in mind. These include cleaning the area around it, inspecting the springs, applying lubricants, and checking the pressure sensor. Follow these tips to keep your door working at its highest efficiency.

Cleaning the Commercial Garage Door

When cleaning the area around a commercial garage door, you must take precautions to avoid damage. If you notice a problem with the garage door, contact a company that provides commercial garage door repair immediately. When cleaning, make sure that you follow all manufacturers’ directions for proper cleaning and maintenance. Always rinse off any residue with water after cleaning the garage doors. Then, use a mild soap that contains less than 0.5% phosphate. You can also use a non-toxic, biodegradable cleaner. After cleaning, apply a wax layer on the door’s steel portion. 

Next, make sure to clean the tracks of the garage door. This prevents it from rolling unevenly. Use a brush that has stiff bristles to brush away debris. you can prefer Fire Shutters that help to prevent your place from fire. You can also use a diluted bleach solution to clean the area. Make sure to rinse thoroughly after cleaning the tracks.

Inspecting the Springs

Commercial garage doors may seem difficult, but there are a few ways to ensure they’re in good working order. One way to do this is by regularly inspecting the springs. The springs are exposed to a lot of stress, so it’s important to check them thoroughly. If you notice any rust, corrosion, or breaks, they may need to be replaced or serviced.

Broken springs can cause the door to cycle even when unbalanced, which puts an unfair amount of stress on the opener system. Broken springs can also lead to excessive wear and tear on the opener system, which may eventually fail. Also, you should check for damaged slats, binding noises, and inconsistent operation speed.

 

Applying Lubricants

The right lubricant can distinguish between a noisy door and one that’s smooth and quiet. In addition to preventing noises, lubrication prevents friction between metal components. This includes hinges, rollers, and springs. To apply lubricant, you must lift the door manually and apply the lubricant to all hinges and springs. Using a clean rag to apply the lubricant to all moving parts is important.

Applying lubricants for maintaining gable doors is essential to ensure smooth operation. Most commercial garage door lubricants are silicone sprays, providing protection between moving parts and reducing friction. These types of lubricants also don’t attract dust and dirt. Another popular option is lithium-based grease, which won’t stick to dirt or other particulates in a garage. When applying lubricant to a garage door, spray it on the hinges while it is partially opened.

Checking the Pressure Sensor

Checking the pressure sensor when maintaining a garage door is vital to the proper functioning of the door. Dirt and debris can block the sensors and cause them to malfunction. It is important to clean the sensor after removing any debris. You can also check the sensors for electrical problems. If the sensors are flashing, the problem could be with the battery or plug. Contact a specialist that handles commercial garage door repairs to diagnose the problem if this is the case.

The sensor should have a green light if it is working properly. If it is flashing or red, then there is a problem. You can repair the sensor by realigning it.

Checking the Weather Stripping

Whether you own a commercial garage or residential home, checking your garage door weather stripping regularly is important. This rubber lining keeps the outside elements out and prevents water damage. Ensure the weatherstripping is in good condition by inspecting it for rips and gaps. In addition, it is important to replace it as needed. With weatherstripping, the garage door can seal the interior space properly.

The weatherstripping should be cleaned and lubricated with an all-purpose vinyl cleanser or silicone-based lubricant. It is important to avoid petroleum-based lubricants because they can damage rubber polymers and decrease flexibility.