Q : How to set the 192.168.10.1 router to access the Internet?
Answer : Among the domestic routers, the Ruiyin router uses 192.168.10.1 as the default login address, so the following Hongge uses the Ruiyin router to demonstrate.
(1) If your router has been set up/used, but now the router is not connected to the Internet. It is recommended to reset your router to factory settings, and then reset it according to the following steps.
(2) Both computers and mobile phones can set up a router to access the Internet. Below, nawaz only introduces the method of using a computer to set up the router to access the Internet. If you want to use your mobile phone to set up the router.wifi wavlink com
For the method of restoring the factory settings of the router, please refer to the following methods:
How to restore the factory settings of the router?
After the router is restored to the factory settings, all the original configuration parameters will be lost, which means that the router will not be able to access the Internet . Therefore, after restoring the factory settings, you need to reset your router. After the setting is successful, you can surf the Internet.
When the router is powered on, press and hold the reset button and don’t release it, and then observe the status of the indicator on the router. When the indicator flashes again, the router has successfully restored the factory settings. You can release the reset button at this time.
Q: How to set the 192.168.10.1 router mobile phone?
Answer: 192.168.10.1 is a class C private IP address. Among the current domestic routers, Ruiyin routers use 192.168.10.1 as the default login address. In view of this, the following Hongge uses the Ruiyin router to demonstrate.
If your router has been set up, but you can’t access the Internet now. In this case, it is recommended to reset your router to factory settings.
Q: How to log in to the setting interface of Ruiyin router?
Answer: Both computers and mobile phones can log in to the setting interface of the Ruiyin router. The following demonstrates the specific login steps. wavlink login page
1. Connect your computer to the LAN port of Ruiyin router with a network cable. If it is a laptop, you can also log in to its setting interface after connecting to the Wi-Fi of the Wi-Fi router.
2. Open the browser on the computer, and enter 192.168.10.1 or wifi wavlink com in the address bar of the browser to open the login page of the Wi-Fi router. In the login page, enter the “management password”, and then click the “confirm” button to log in to the setting interface of the Ruiyin router
For any other details about wifi wave link com check site nawazpanda.